Used Anderson Exxact Plus Single Table CNC Router

Used Anderson Exxact Plus Single Table CNC Router

2016 Used Anderson Exxact Plus Single Table CNC Router with 2 Automatic Tool Changers

This video is NOT exactly the machine that is being listed for sale but only a close representation see details below


Fixed Bridge (moving table) type machine equipped with 2 (two) 18 HP 4-pole air-cooled router spindles,
with grease lubricated ceramic bearings, dual 10-Position Automatic Tool Changing Systems, with one tool length touch probe.
The spindle motor is powered by an electronic AC inverter drive system with dynamic spindle braking.
Full Torque is achieved at 9,000 RPM & Full HP is achieved at 12,000 RPM.
Tool Changer Carousels are mounted on the spindle carriage, next to the Router Spindle, for fast & efficient tool changes.

Single Table CNC Router 5 x 12

X & Y axes are constructed of massive, heavy-duty welded steel construction with multiple reinforcements to increase strength
and absorb vibration. Z-axis spindle carriage is a specially designed Meehanite casting for high strength and inherent vibration dampening
characteristics with a pneumatic counterbalance system for smooth & accurate operation.


 Table size                                            3700 mm x 1600 mm (145” x 63”)

Pop-Up Positioning Pins                 10

Vacuum Zones per Table                 1 (one)

Axis stroke                                         X axis:             4450 mm (175”)
Y axis:             1775 mm (70”)
Z axis:             350 mm (13.8”)

Maximum Rapid Rate                     X-axis:            80 meters/min (3,150”/min)
Y-axis:             80 meters/min (3,150”/min)
Z-axis:             30 meters/min (1,180”/min)

Maximum Feedrate                         X-axis:            80 meters/min (3,150”/min)
Y-axis:            80 meters/min (3,150”/min)
Z-axis:            30 meters/min (1,180”/min)

Spindle #1 & #2 – Router Spindle – (350-900mm adjustable)

Two Automatic Tool Changers

Spindle type                            Anderson 4-Pole
Motor power                           13.5Kw (S6): 11Kw (S1)
Spindle speed (RPM)            1000-22000
No. of changeable tools        10 per tool changer
Spindle nose                           HSK63F taper

FANUC OiMD Controller System + Windows PC Front End User Interface

Fanuc 0iMD Controller

This Anderson CNC Proudly uses the latest, Series 0i-MODEL D, with nano-resolution performance.
With over 700,000 systems installed, the 0/0from FANUC is by far the world’s most popular CNC control.
The Series 0i-MODEL D achieves the highest precision possible, with nanometer resolution standard throughout the CNC system.
Fast, high resolution 16-million count-per-revolution feedback devices combine to provide a superior surface finish quality when contouring.
This minimizes the need for secondary operations, reducing delivery times & part cost.


Fanuc Hand Held

Fanuc Hand Held

This Standard Feature simplifies feed rate & spindle speed overrides from anywhere around the machine,
as well as an additional E-Stop function.  The HPG jog wheel also allows for manual jogging of the machine,
stepping manually through a program, or manual movement or verification of a single axis.
This pendant comes corded for portability & convenience.

Vacuum hold down system

2 (two) Becker Pumps with H-Rack
Power requirements (per pump)
Flow (per pump)         168 cfm
Total Pressure             24″ Hg

Machine footprint
Floor area                    220” x 134”
Height                          116”

Net Machine Weight                           9,000 Kg*                    (19,840 lbs.)    *not including pump(s)


Share this post