2009 Mazak Integrex 100IVST Multi Tasking CNC Lathe
2009 Mazak Integrex 100IVST Multi Tasking CNC Lathe
Description
EQUIPPED WITH: - 9 station lower turret - C2 sub spindle, 5000rpm - 40 tool mag, CAT40 - Parts catcher - Concept 2000 chip conveyor - LNS bar feed - 100psi pump thru “B” axis spindle - Wired for probe - TOOLING
Specifications
| Manufacturer | Mazak |
| Model | Integrex 100IVST |
| Year | 2009 |
| Condition | Used |
| Stock Number | XL12923JA |
| Control type | Mazatrol |
| Maximum swing | 21.46" |
| Bar capacity | 1.65 |
| Chuck diameter | 6.00 |
| Lathe type | Lathes, Combination, CNC Turning Center, Multi Tasking |
| Standard Chuck Dia. Main Spindle (L) | 6″ |
| Standard Chuck Dia. Second Spindle (R) | 6″ |
| Maximum Swing | 21.46″ |
| Maximum Swing using Y-axis | 16.22″-21.46″ |
| Maximum Swing over Cross Slide | 13.86″ |
| Maximum Swing over Lower Turret | 15.75″ |
| NOTE | Without boring bar holder on turret. |
| Maximum Cutting Diameter | Chucking - 21.46″ (Upper) |
| Maximum Cutting Length | 29.65″ |
| Maximum Distance Between Chuck Faces | 28.9″ |
| Spindle Bore | 2.4″ |
| Maximum Bar Work | 1.65″ |
| Spindle Speed | 6,000 RPM |
| Spindle Index (Programmable) | 0.0001 Deg. |
| Spindle Horsepower (Cont./30 Mins.) | 10/15 HP (AC) |
| SECOND SPINDLE SPECIFICATIONS (R) Spindle Nose | A2-5 |
| SECOND SPINDLE SPECIFICATIONS (R) Spindle Bore | 2.4″ |
| SECOND SPINDLE SPECIFICATIONS (R) Spindle Speed | 6,000 RPM |
| SECOND SPINDLE SPECIFICATIONS (R) Spindle Index (Programmable) | 0.001 Deg. |
| SECOND SPINDLE SPECIFICATIONS (R) Spindle Horsepower (Cont./30 Min.) | 10/15 HP (AC) |
| Magazine Capacity | 40 tools |
| ATC Tool Shank | Mazak Cat 40 |
| Rotary Tool Spindle Speed | 12,000 RPM |
| Type of Turret | Drum |
| Total Number of Tools | 9 |
| B-Axis | 225 degrees |
| Y-Axis | +/-2.75″ |