Used 2013 Deckel Maho DMF 260 (Y1100) Linear 5 Axis VMC

Used 2013 Deckel Maho DMF 260 (Y1100) Linear 5 Axis VMC

  • Manufacturer: Deckel Maho
  • Stock Number: XL122717MW
  • Control Type: Siemens
  • Taper: Cat 40
  • X Axis Travel: 102.3
  • Y Axis Travel: 43.3
  • Z Axis Travel: 35.43
  • 4th Axis: Yes
  • Description

Description

Traveling Column Machining Center

  1. Table Size……………………………………125.98″ x 43.30″
  2. X Axis Travel………………………………102.36″
  3. Y Axis Travel………………………………43.3″
  4. Z Axis Travel………………………………35.43″
  5. Z Axis has Temperature Sensor
  6. Spindle Taper…………………………….Cat 50
  7. Spindle Speed…………………………….20 ~ 8000 RPM
  8. Swivelhead B Axis………………………20 – 10,000 RPM, DK 50 for Tool Taper  OPTION
  9. Rapid Traverse…………………………..131.2 ft/min
  10. Acceleration………………………………13.12 ft/min
  11. Spindle Motor…………………………..23.5/13.5KW  // 31.5/18.1HP
  12. Spindle Taper…………………………..SK40 DIN 69871
  13. Magazine Capacity…………………..60 ATC (chain with double gripper)  OPTION

Equipped With:

  • Siemens SINUMERIK 840D
  • Rigid table with integrated round table
    d 1050 mm // 41.3 in, located in the left working area
    table load max. 1,200 kg// 2,644 lbs
    hydraulic clamped in position
  • Clamping hydraulic for rigid/integrated
    round table, 30-240 Bar, 2 circuits
  • Swivelhead, B-axis, 20 – 10,000 rpm, SK50
    for tool taper according to DIN69871
    with power 52/42 kW // 69.7/56.3 hp
    with torque 413/303 Nm (40/100% DC)
  • Design for tool mounting CAT 50
  • Mechanical setup station for
    tool loading SK50/HSK-A100
  • Infrared touch probe
    type Renishaw PP 60 optical (OMP60)
  • Laser tool measuring Blum
    (not with TT 140 possible, for pendulum machining
    please order 2 pieces)
  • 3D quickSET
    Tool kit for control and compensation
    of the cinematic accuracy of
    5 axis machine configurations
    (only with option touch probe)
  • MPC Machine Protection Control
    Machine protection by quick shutdown
  • Signal lamp, 4 colors
    MDX-632 Rotary Table (Table Diameter 630mm with
    14.57“ thru hole)
  • Internal coolant supply (ICS) with paper type filter
    40/80 Bar/980 l // 580/1160 psi/258.8 gallon
    for spindle speed from 18,000 rpm and for
    10,000 rpm SK50/HSK-A100 spindle
    inclusive 2 rotating clear window,
    air purge for linear measuring system,
    rotary joint for main spindle
  • Spray gun for swarf removal
  • Air blast through spindle center
    activated by M function,
    maintained air with low oil rate
  • Chip Conveyor