Used 2010 Mazak Hyper Quadrex 200MSY with Loader and Exit Conveyor

Used 2010 Mazak Hyper Quadrex 200MSY with Loader and Exit Conveyor

Turret 1, 1861 Total Cut Hours

Turret 2, 2109 Total Cut Hours

  • Manufacturer: Mazak
  • Stock Number: XT011718
  • Control Type: Mazatrol
  • Maximum Swing: 14.56″/12.598″
  • Bar Capacity: 2.56" / 2.56"
  • Chuck Diameter: 8.0
  • Lathe Type: Lathes, Combination, CNC Turning Center
Category:
  • Description

Description

  1. Maximum Swing Diameter…….14.56″/12.598″
  2. Distance Between Centers…….46.8″
  3. Maximum Machining Diameter Upper/Lower….13.54″ / 8.26″
  4. Spindle Bore 1st & 2nd………2.99″
  5. Maximum Bar Capacity 1st & 2nd…..2.56″
  6. Spindle Nose………A2-6
  7. Spindle Speed 1st & 2nd…….5000 RPM
  8. Spindle Torque 1st & 2nd……..344.4 FT/lbs
  9. Spindle Horsepower 1st & 2nd………….30 HP AC
  10. C – Axis Travel 1st & 2nd…………..0001 Degree
  11. X1, X2 – Axis Travel……………..9.06″, 9.06″
  12. Y1, Y2 – Axis Travel……………. 2.0″, 75″ – 2.0″
  13. Z1, Z2 – Axis Travel……………………..17.7″, 19.37″
  14. W – Axis Travel……………………….34.075″
  15. Rapid Traverse…………………………. X1, X21181, 945 IPM
  16. Rapid Traverse……………………………… Y1, Y21024 787 IPM
  17. Rapid Traverse…………………………….. Z1, Z21417 1417 IPM
  18. Rapid Traverse C1, C2……………………..555 555 RPM
  19. Type Of Turret Upper/lower…………………..12 Pos. VDI Drum
  20. Tool Shank………………..1″ sq.
  21. Total Number Of Tools Upper And Lower…………………………12
  22. Tool Selection Method……………..Bi-directional
  23. Rotary Tool Speed……………………..6,000 RPM
  24. Rotary Tool Torque………………….25.8 ft/lbs.
  25. Rotary Tool HP……………………………7.5 HP AC
  26. Max. End Mill/drill/tap…………………….75″ / .75″ / M20x2.5 Dia.`
  27. Total Power Requirements…………………………..220V
  28. Machine Weight………………………………………..27,000 lbs.

 

Equipped With:

  • Mazatrol Matrix CNC Control
  • Chip Conveyor
  • 2) 8″ Hydraulic ChuckMAZATROL MATRIX CNC CONTROL W/ VOICE ADVISER
  • WINDOWS XP OPERATING SYSTEM
  • WORKPIECE UNLOADER/ CONVEYOR – 3.03″ X 7.09″ X 11.02″ LB MAX
  • WORKPIECE UNLOADER/ CONVEYOR MODIFIED FOR 2″ X 10″ L WORK W/SP HAND JAWS
  • **ALSO HAS TOELLNER LOADER UNLOAD SYSTEM**
  • MILLING-SPINDLE SYNCHRONOUS TAPPING
  • HI-PRESSURE COOLANT – 213PSI W/TEMPERATURE CONTROL
  • 2ND SPINDLE C-AXIS 0.0001 DEGREE INCR.
  • MAIN & SUB SPINDLE SYNCHRONIZATION
  • TWIN SPINDLE
  • AUTOMATIC TOOL EYE 1ST AND 2ND SPINDLES
  • 12 POSITION DRUM TURRET (VDI: UPPER)
  • 12 POSITION DRUM TURRET (VDI: LOWER)