Used 2008 Okuma Multus B400-W 1500 Mill/Turn CNC Lathe

Used 2008 Okuma Multus B400-W 1500 Mill/Turn CNC Lathe

  • Manufacturer: Okuma
  • Stock Number: XL7252017OR
  • Control Type: OSP
  • Maximum Swing: 27.17
  • Cutting Length: 59.05
  • Bar Capacity: 4
  • Chuck Diameter: 10.00
  • Lathe Type: Lathes, Combination, CNC Turning Center
  • Description

Description

  1. Max. turning diameter………. 27.17″
  2. Y-Axis Travel ………. 9.06″
  3. Between centers……. 59.055″
  4. W-Axis Travel…….  59.055″
  5. Swing over bed ……. 27.95″
  6. Max. Turning Diameter…..  27.95″
  7. Distance Between Spindle …… 78.74″
  8. Main Spindle Nose……  A2-11
  9. Main Spindle Speed ……..  2,800 RPM
  10. Bar Capacity………. 4″
  11. Chuck Size……..  15″ x 2
  12. Opposed Spindle Nose……  A2-11
  13. Opposed Spindle Speed …….  2,800 RPM
  14. C-Axis Increment Travel…… .001°
  15. B-Axis Index Angle  ….. 30° to 195°
  16. B-Axis Incremental Angle ………001°
  17. Turret Type ……….. H1
  18. Number to Tooling ………….1 LIVE OR MILL TOOL
  19. Rotary Tool Speed ………..10,000 RPM
  20. ATC Magazine ………….80 CAPTO C6
  21. Main Spindle Horsepower …………… 30/20 HP
  22. Opposing Spindle Drive Motor ………..30/20 HP
  23. Approx. Weight ……….. 37,200 LBS.
  • Equipped With:
  • OSP P200L CNC Control
  • ABSO Scales for X Y Z
  • 80 Tool Automatic Tool Changer CAPTO C6
  • Auto Door Both with Dual cycle start
  • Auto Gauging, Renishaw LP2
  • Auto Zero Offset
  • Quick Six LNS Automatic Bar Load System
  • Bar-Feeder interface
  • Caron TMAC
  • Caron TMAC7 interface
  • Caron Auto Comp
  • C-Axis Auto Zero Offset Function
  • Conveyor Hinge with side discharge
  • Coolant Level Check
  • Extra Common Variables 1000 sets
  • Extra Program Select Push Button
  • 1/0 Variable, User Task II
  • Gauging Data Printout
  • Gear Cutting
  • Rapid Traverse override
  • Robot/ Loader interface Type D
  • Parts Catcher
  • Shower Coolant B Type
  • M-Codes 8 Spare
  • Spindle RPM 10,000 H1
  • Splash Gun
  • Thru Spindle Coolant 1000 psi with Chip Blaster Chip Blaster Interface
  • Tool Offset 200 Sets
  • Tool Retract Function
  • Touch Setter
  • Automatic Work Pusher
  • F/H1 Turret
  • Y-Axis Gauging
  • Z-Axis Auto Zero Offset Function
  • SMX Quick Jaw Change Chucks
  • The numbers listed below started cumulating on 7/17/2008 when the machine was installed new.
  • Total Machine On Time:        19181 Hours
  • Spindle Runtime:                     4243 Hours
  • Cutting Time:                             3201 Hours