Used 2009 Mazak Integrex 200 IVS CNC Lathe

Used 2009 Mazak Integrex 200 IVS CNC Lathe

Installed in 2009 with only approximately  2600 cut hours

  • Manufacturer: Mazak
  • Stock Number: XL091117
  • Control Type: Mazatrol
  • Maximum Swing: 26.0
  • Cutting Length: 40.00
  • Bar Capacity: 2.00
  • Chuck Diameter: 8.00
  • Lathe Type: Lathes, Combination, CNC Turning Center
  • Sub Spindle Chuck Dia.: 8.00
  • Description

Description

  1. Standard Chuck Dia. Main Spindle (L)…. 8″
  2. Standard Chuck Dia. Second Spindle (R).. 8″
  3. Maximum Swing……………………… 26″
  4. NOTE: Tool eye body may limit max. swing.
    Maximum Swing over Carriage…………. 19.5″ -26″
  5. NOTE: Depends upon workpiece length,
    tool magazine type and Y axis position
  6. Maximum Cutting Diameter: Chucking…… 26″
  7. Maximum Cutting Length……………… 40″
    Maximum Distance Between Standard Chuck Faces.. 41.14″

MAIN SPINDLE SPECIFICATIONS (L):

  1. Spindle Nose………………………. A2-6
  2. Spindle Bore………………………. 2.99″
  3. Maximum Bar Work…. ………………. 2″
  4. Spindle Speed……………………… 35 – 5000 RPM
  5. Spindle Index (Programmable)………… 0.0001 Degree
  6. Spindle Horsepower (Cont./30 Mins.)….. 20/30 H.P. (A.C.)
  7. Spindle Torque…………………….. 258.1 ft-lbs

SECOND SPINDLE SPECIFICATIONS (R)

  1. Spindle Nose………………………. A2-6
  2. Spindle Bore………………………. 2.99″
  3. Maximum Bar Work…………………… 2″x 34.6″ deep from chuck face
  4. Spindle Speed……………………… 35 – 5000 RPM
  5. Spindle Index (Programmable)…………0.0001 Deg.
  6. Spindle Horsepower (Cont./30 min)……. 20/25 HP (A.C.)
  7. Spindle Torque…………………….. 241 ft-lbs

TURRET AND TOOLING SPECIFICATIONS:

  1. Type of Turret…………………….. 1 Position, w/ATC
  2. Tool Shank Height………………….. 1.0″
  3. Tool Size (Boring Bar Max. Dia.)…….. 1.5″
  4. Magazine Capacity………………….. 40 Tools
  5. Tool Selection Method………………. Random
  6. ATC Tool Shank…………………….. Mazak KM63
  7. Rotary Tool Spindle Speed…………… 12,000 RPM
  8. Rotary Tool Spindle Horsepower (20% ED). 25 H.P. (A.C.)

AXIS TRAVELS:

  1. B-Axis……………………………. 225 degrees
  2. Y-Axis……………………………. +/- 3.15″
  3. X-Axis……………………………. 22.83″
  4. Z-Axis……………………………. 41.14″
  5. Second Headstock W-Axis…………….. 41.34″

GENERAL SPECIFICATIONS:

  1. Floor Space (WxL)………………….. 86.93″ x 150.39″
  2. Machine Height…………………….. 102.24″
  3. Total Power Required (Machine Only)….. 63 KVA
  4. NOTE: Actual Machine Main Transformer
    KVA Rating Will be Greater.
  5. Air Requirements…………………… 71 PSI / 24.7 CFM
  6. Machine Weight…………………….. 19,140 lbs.

EQUIPPED WITH:

  • MAZATROL MATRIX NEXUS CONTROL
  • C1C2 SYNCHRONOUS FUNCTION
  • MAZACC-3D HIGH SPEED SOFTWARE PACKAGE
  • EIA/ISO FUNCTION
  • SIMULTANEOUS 5 AXIS
  • TOOL TIP POINT CONTROL SIMULTANEOUS 5 AXES
  • TOOL RADIUS COMPENSATION 5-AXIS
  • 15KG/213 PSI THRU COOLANT FLOOD SIMUL-FLOWABLE
  • 8″ THRU-HOLE CHUCK BB-08 (1ST SPD.) THRU-HOLD CYL.S1875
  • 2ND SPINDLE C-AXIS 0.0001 DEGREE INCR.
  • 40 KM-TOOL MAGAZINE
  • CHIP CONVEYOR SIDE DISPOSAL (HINGE TYPE)
  • ALL AVAILABLE MANUALS
  • Approx. 2600 Cut Hours
  • 80 KM Tool Holders